Skip to end of metadata
Go to start of metadata

After installation, you need to configure the CDP Server. You can get examples of the input with:

# r1soft-setup --help

1. Define a username and password for the CDP Server Web Interface.

# r1soft-setup --user DESIRED_USERNAME --pass DESIRED_PASSWORD

After running you will see output similar to:

# r1soft-setup --user admin --pass r1soft Server username and password set The R1Soft CDP Server must be restarted for these changes to take effect Use '/etc/init.d/cdp-server restart' to restart.

2. By default, the embedded web server required for the Web-based Interface will listen on TCP ports 80 (HTTP) and 443 (HTTPS). These ports are frequently in use by your Linux Server (e.g. by Apache). If you are already using ports 80 and 443, you will need to define different ports. 8080 (HTTP) and 8443 (HTTPS) are recommended alternatives to standard 80 and 443. You can chose any valid and unused TCP port that you like.

# r1soft-setup --http-port 8080 --https-port 8443

3. Start the Web Interface (CDP Server):

/etc/init.d/cdp-server restart

4. You may need to change firewall rules depending on where you are connecting to the Web Interface from.

5. You may need to configure heap memory. See Configuring Heap Memory.

6. You should now be able to connect to the CDP Enterprise Edition Web Interface using Firefox or Internet Explorer. See Accessing Enterprise Edition Web Interface.

Note
You do not need to install the kernel module on the Server.

For more information, refer to the following topics:

Labels:
enterprise_edition enterprise_edition Delete
linux linux Delete
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.